Look at this site to find DIY parts for all sorts of jobs.

    DIY Electronics 120960 HUBOSD Eco H Type Current Sensor 140A Dual BEC OSD Distribution Board

    DIY Electronics 120960 HUBOSD Eco H Type Current Sensor 140A Dual BEC OSD Distribution Board}

    Listed below you will find deals and ordering choices and also several other information on the DIY Electronics 120960 HUBOSD Eco H Type Current Sensor 140A Dual BEC OSD Distribution Board. In case you’re interested in the item and require additional advice click on the “Picture” or “BUY NOW” buttons for even more resources.

    DIY Electronics 120960

    List Price = $16.89

    Sale Price =

    Buy Now

    Description = HUBOSD Eco H Type Current Sensor 140A Dual BEC OSD Distribution Board.

    Long Description =

    HUBOSD Eco H Type Current Sensor 140A Dual BEC OSD Distribution Board

    Features:
    Dual BEC H Type
    The HUBOSD8 has been engineered to provide the highest possible performance and reliability in a 4 layers PCB.
    It is a multifunctional HUB with PDB, BEC 5V/2A &12V/500mA, Current sensor 140A, STOSD8.
    The BEC 12V is linear regulator, no LC Filter needed.
    Built-in STOSD8 can support Plug & Play, no complicated settings needed.
    It is specially made for the mini FPV Quad.

    Specifications:
    General:
    In: 8-21VDC (3-5S LIPO)
    PDB: 4 X 30A (MAX. 4 x 35A)
    BEC: 5V/2A, 12V/0.
    Color: Blue
    Size: 45 x 35 x 4mm/1.78 x 1.38 x 0.16 inch
    Package size: 119 x 79mm/4.69 x 3.11 inch
    Net weight: 12g
    Package weight: 14g
    PDB: (ESC outputs)
    Continuous current: 30A per output
    Peak current (10 seconds/minute): 35A per output

    Physical:
    2oz copper, 4-layers &1.6mm PCB.
    1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 2x BEC 12V outputs.
    Camera signal & Gnd pads, Video Transmitter Signal & Gnd pads
    1x Serial port (RX, TX, G)
    Mounting holes 30.5mm square spacing, 3mm

    BEC 5V (outputs):
    Designed for RC Receivers, Flight controllers, OSD, and Servos.
    DC/DC synchronous buck regulator.
    Voltage: 5.0 +/- 0.1VDC
    Continuous current: 2 Amps (Max.2.5A 10s/minute)
    Output Ripple: 40mV (VIn=16V, [email protected] load)
    Short-circuit tolerant (5 seconds/minute)

    BEC 12V (outputs):
    Linear regulator, very low noise. LC Filter is needless.
    Designed for Video TX or FPV camera.
    Voltage: 12.0 +/- 0.3VDC (4-5S operation)
    Continuous current: [email protected] IN, [email protected] IN
    Short-circuit tolerant (2 seconds/minute)
    If the battery is 3S LiPo, Output voltage=3S LiPo voltage – 1V

    Current Sensor:
    140A
    If current >140A. STOSD display 140A

    STOSD-8:
    1) Running indicator
    Blue LED blinks: STOSD is initializing
    Blue LED light: STOSD is working.
    2) Autodetect PAL/NTSC
    Auto sense PAL / NTSC cam at OSD startup. Default is NTSC without Cam signal
    3) Dynamic on screen info
    Current < 2A & keep 5 seconds
    Current > 2A
    4) Min.Volt & Max.Amp recorder
    5) Automatic flight timer
    Current > 2A, Time in.
    Current < 2A,Time out.
    6) Auto battery cells detection
    If the Input voltage is in the range of following, The HUBOSD will detect the cell
    numbers automatically.
    11.1-13.05V: 3cells LiPo, 14.8-17.4V: 4cells LiPo, 18.5-21V: 5cells LiPo
    If the input voltage is out of the range. The voltage value will blink on screen.
    Pls check if the battery total voltage is below 3.7V*cells
    7) Low vlotage alarm
    (Value blinks): Default 3.6V* cells
    8) Exceeding mAh alarm
    (Value blinks): Default 1000mAh
    9) Onscreen Pilot ID
    Default is disable. you can type some words & enable it in GUI
    10) Firmware upgradable
    Voltage precision: +/- 0.4%, Voltage resolution: 0.01V
    Current precision: +/- 1.5%, Current resolution: 0.1A

    Package Content:
    1 x Dual BEC OSD Distribution Board
    1 x Bag of Accessories


    Click Here for additional details on the product.

    Type = Home/Family

    Department = Home Improvement

    Category = Electronic Tools

    Sub Category =

    additional Details = HUBOSD Eco H Type Current Sensor 140A Dual BEC OSD Distribution Board

    Part Number = 120960

    Vendor = Newfrog.com

    Vendor ID = 46666

    Pricing and Availability are subject to change. Click on the BUY NOW link or picture for up to date product details and other useful information directly from the vendor selling the DIY Electronics 120960 HUBOSD Eco H Type Current Sensor 140A Dual BEC OSD Distribution Board. ) 

    Didn’t find exactly what your looking for. Click on this link to find out everything this vendor has to offer. =
    DIY Geek, Computer Geek, Media Geek..

    DIY Electronics 120960 HUBOSD Eco H Type Current Sensor 140A Dual BEC OSD Distribution Board

    Long Description =

    HUBOSD Eco H Type Current Sensor 140A Dual BEC OSD Distribution Board

    Features:
    Dual BEC H Type
    The HUBOSD8 has been engineered to provide the highest possible performance and reliability in a 4 layers PCB.
    It is a multifunctional HUB with PDB, BEC 5V/2A &12V/500mA, Current sensor 140A, STOSD8.
    The BEC 12V is linear regulator, no LC Filter needed.
    Built-in STOSD8 can support Plug & Play, no complicated settings needed.
    It is specially made for the mini FPV Quad.

    Specifications:
    General:
    In: 8-21VDC (3-5S LIPO)
    PDB: 4 X 30A (MAX. 4 x 35A)
    BEC: 5V/2A, 12V/0.
    Color: Blue
    Size: 45 x 35 x 4mm/1.78 x 1.38 x 0.16 inch
    Package size: 119 x 79mm/4.69 x 3.11 inch
    Net weight: 12g
    Package weight: 14g
    PDB: (ESC outputs)
    Continuous current: 30A per output
    Peak current (10 seconds/minute): 35A per output

    Physical:
    2oz copper, 4-layers &1.6mm PCB.
    1x Battery input, 4x ESC outputs. 2x BEC 5V outputs, 2x BEC 12V outputs.
    Camera signal & Gnd pads, Video Transmitter Signal & Gnd pads
    1x Serial port (RX, TX, G)
    Mounting holes 30.5mm square spacing, 3mm

    BEC 5V (outputs):
    Designed for RC Receivers, Flight controllers, OSD, and Servos.
    DC/DC synchronous buck regulator.
    Voltage: 5.0 +/- 0.1VDC
    Continuous current: 2 Amps (Max.2.5A 10s/minute)
    Output Ripple: 40mV (VIn=16V, [email protected] load)
    Short-circuit tolerant (5 seconds/minute)

    BEC 12V (outputs):
    Linear regulator, very low noise. LC Filter is needless.
    Designed for Video TX or FPV camera.
    Voltage: 12.0 +/- 0.3VDC (4-5S operation)
    Continuous current: [email protected] IN, [email protected] IN
    Short-circuit tolerant (2 seconds/minute)
    If the battery is 3S LiPo, Output voltage=3S LiPo voltage – 1V

    Current Sensor:
    140A
    If current >140A. STOSD display 140A

    STOSD-8:
    1) Running indicator
    Blue LED blinks: STOSD is initializing
    Blue LED light: STOSD is working.
    2) Autodetect PAL/NTSC
    Auto sense PAL / NTSC cam at OSD startup. Default is NTSC without Cam signal
    3) Dynamic on screen info
    Current < 2A & keep 5 seconds
    Current > 2A
    4) Min.Volt & Max.Amp recorder
    5) Automatic flight timer
    Current > 2A, Time in.
    Current < 2A,Time out.
    6) Auto battery cells detection
    If the Input voltage is in the range of following, The HUBOSD will detect the cell
    numbers automatically.
    11.1-13.05V: 3cells LiPo, 14.8-17.4V: 4cells LiPo, 18.5-21V: 5cells LiPo
    If the input voltage is out of the range. The voltage value will blink on screen.
    Pls check if the battery total voltage is below 3.7V*cells
    7) Low vlotage alarm
    (Value blinks): Default 3.6V* cells
    8) Exceeding mAh alarm
    (Value blinks): Default 1000mAh
    9) Onscreen Pilot ID
    Default is disable. you can type some words & enable it in GUI
    10) Firmware upgradable
    Voltage precision: +/- 0.4%, Voltage resolution: 0.01V
    Current precision: +/- 1.5%, Current resolution: 0.1A

    Package Content:
    1 x Dual BEC OSD Distribution Board
    1 x Bag of Accessories


    Click Here for additional details on the product.

    Type = Home/Family

    Department = Home Improvement

    Category = Electronic Tools

    Sub Category =

    additional Details = HUBOSD Eco H Type Current Sensor 140A Dual BEC OSD Distribution Board

    Part Number = 120960

    Vendor = Newfrog.com

    Vendor ID = 46666

    List Price = $16.89

    Sale Price =

    Buy Now

    DIY Electronics 120960 HUBOSD Eco H Type Current Sensor 140A Dual BEC OSD Distribution Board are offered via affiliate services. Deals and availability are prone to adjustment at any time. Simply clicking the image or buy now button will take you to that particular sellers website for up to date information.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Categories