Look at this site to find DIY parts for all sorts of jobs.

    DIY Electronics 126090 2Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM

    DIY Electronics 126090 2Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM}

    Below you can find deals and ordering recommendations combined with various other details on the DIY Electronics 126090 2Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM. If you are excited about the item and need additional information click on the “Picture” or “BUY NOW” buttons for additional information.

    DIY Electronics 126090

    List Price = $1.40

    Sale Price =

    Buy Now

    Description = 2Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM.

    Long Description = 2Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM

    Features:
    1. With isolation groove in control area and load area.
    2. With power and relay action indication, bright when connect and go off when disconnects.
    3. When there is a signal in signal input, public side and common side will breakover.
    4. It can be not only used as a microcontroller development board module, but also as a home appliance control.
    5. It can not only control the DC or AC signal, but the 220V AC load.
    6. With a  permanent open and close vents contact.
    7. It is convenient to connect with blue KF301 terminal access control cable.

    Specifications:
    1. VCC: Power interface, 24V
    2. GND: Ground
    3. IN: Control interface. Drive Current at least 4mA
    4. COM: Control circuit ground ,Connect to GND
    5. Product Size: approx. 44*16*16mm/1.73*0.62*0.62”
    6. Net weight: approx. 24g
    7. Quantity: 2pcs

    Note:  
    1. High level flip-flops shows that there are trigger mode of the voltage between the signal input terminal and the ground; That is to say it is a way of short circuit trigger between signal input and VCC positive pole.
    2. Low level flip-flops shows that there are voltage for OV trigger mode  between the signal input terminal and the ground. In a word, it is a way of short circuit trigger between signal input and GND negative pole.
    3. Please allow 1-3mm differs due to manual measurement.
    4. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.

    Package Content:
    2 x Relay Module

    Click Here for additional details on the product.

    Type = Home/Family

    Department = Home Improvement

    Category = Electronic Tools

    Sub Category =

    additional Details = 2Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM

    Part Number = 126090

    Vendor = Newfrog.com

    Vendor ID = 46666

    Pricing and Availability are subject to change. Click on the BUY NOW link or picture for up to date product details and other useful information directly from the vendor selling the DIY Electronics 126090 2Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM. ) 

    Didn’t find exactly what your looking for. Click on this link to find out everything this vendor has to offer. =
    DIY Geek, Computer Geek, Media Geek..

    DIY Electronics 126090 2Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM

    Long Description = 2Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM

    Features:
    1. With isolation groove in control area and load area.
    2. With power and relay action indication, bright when connect and go off when disconnects.
    3. When there is a signal in signal input, public side and common side will breakover.
    4. It can be not only used as a microcontroller development board module, but also as a home appliance control.
    5. It can not only control the DC or AC signal, but the 220V AC load.
    6. With a  permanent open and close vents contact.
    7. It is convenient to connect with blue KF301 terminal access control cable.

    Specifications:
    1. VCC: Power interface, 24V
    2. GND: Ground
    3. IN: Control interface. Drive Current at least 4mA
    4. COM: Control circuit ground ,Connect to GND
    5. Product Size: approx. 44*16*16mm/1.73*0.62*0.62”
    6. Net weight: approx. 24g
    7. Quantity: 2pcs

    Note:  
    1. High level flip-flops shows that there are trigger mode of the voltage between the signal input terminal and the ground; That is to say it is a way of short circuit trigger between signal input and VCC positive pole.
    2. Low level flip-flops shows that there are voltage for OV trigger mode  between the signal input terminal and the ground. In a word, it is a way of short circuit trigger between signal input and GND negative pole.
    3. Please allow 1-3mm differs due to manual measurement.
    4. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.

    Package Content:
    2 x Relay Module

    Click Here for additional details on the product.

    Type = Home/Family

    Department = Home Improvement

    Category = Electronic Tools

    Sub Category =

    additional Details = 2Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM

    Part Number = 126090

    Vendor = Newfrog.com

    Vendor ID = 46666

    List Price = $1.40

    Sale Price =

    Buy Now

    DIY Electronics 126090 2Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM are available by way of affiliate programs. Price and quantity are subjected to change at any time. Simply clicking the image or buy now tab will take you to that merchants website for up to date information.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Categories