Look at this site to find DIY parts for all sorts of jobs.

    DIY Electronics 126091 5Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM

    DIY Electronics 126091 5Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM}

    Directly below you can discover prices and ordering methods and also even more information on the DIY Electronics 126091 5Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM. If you are inquisitive about the item and desire additional assistance click on the “Picture” or “BUY NOW” buttons for additional related information.

    DIY Electronics 126091

    List Price = $3.25

    Sale Price =

    Buy Now

    Description = 5Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM.

    Long Description = 5Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM

    Features:
    1. With isolation groove in control area and load area.
    2. With power and relay action indication, bright when connect and go off when disconnects.
    3. When there is a signal in signal input, public side and common side will breakover.
    4. It can be not only used as a microcontroller development board module, but also as a home appliance control.
    5. It can not only control the DC or AC signal, but the 220V AC load.
    6. With a  permanent open and close vents contact.
    7. It is convenient to connect with blue KF301 terminal access control cable.

    Specifications:
    1. VCC: Power interface, 24V
    2. GND: Ground
    3. IN: Control interface.Drive Current at least 4mA
    4. COM: Control circuit ground ,Connect to GND
    5. Product Size: Approx. 44*16*16mm/1.73*0.62*0.62”
    6. Net weight: Approx. 60g
    7. Quantity: 5pcs

    Note:  
    1. High level flip-flops shows that there are trigger mode of the voltage between the signal input terminal and the ground; That is to say it is a way of short circuit trigger between signal input and VCC positive pole.
    2. Low level flip-flops shows that there are voltage for OV trigger mode  between the signal input terminal and the ground. In a word, it is a way of short circuit trigger between signal input and GND negative pole.
    3. Please allow 1-3mm differs due to manual measurement.
    4. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.

    Package Content:
    5 x Relay Module

    Click Here for additional details on the product.

    Type = Home/Family

    Department = Home Improvement

    Category = Electronic Tools

    Sub Category =

    additional Details = 5Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM

    Part Number = 126091

    Vendor = Newfrog.com

    Vendor ID = 46666

    Pricing and Availability are subject to change. Click on the BUY NOW link or picture for up to date product details and other useful information directly from the vendor selling the DIY Electronics 126091 5Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM. ) 

    Didn’t find exactly what your looking for. Click on this link to find out everything this vendor has to offer. =
    DIY Geek, Computer Geek, Media Geek..

    DIY Electronics 126091 5Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM

    Long Description = 5Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM

    Features:
    1. With isolation groove in control area and load area.
    2. With power and relay action indication, bright when connect and go off when disconnects.
    3. When there is a signal in signal input, public side and common side will breakover.
    4. It can be not only used as a microcontroller development board module, but also as a home appliance control.
    5. It can not only control the DC or AC signal, but the 220V AC load.
    6. With a  permanent open and close vents contact.
    7. It is convenient to connect with blue KF301 terminal access control cable.

    Specifications:
    1. VCC: Power interface, 24V
    2. GND: Ground
    3. IN: Control interface.Drive Current at least 4mA
    4. COM: Control circuit ground ,Connect to GND
    5. Product Size: Approx. 44*16*16mm/1.73*0.62*0.62”
    6. Net weight: Approx. 60g
    7. Quantity: 5pcs

    Note:  
    1. High level flip-flops shows that there are trigger mode of the voltage between the signal input terminal and the ground; That is to say it is a way of short circuit trigger between signal input and VCC positive pole.
    2. Low level flip-flops shows that there are voltage for OV trigger mode  between the signal input terminal and the ground. In a word, it is a way of short circuit trigger between signal input and GND negative pole.
    3. Please allow 1-3mm differs due to manual measurement.
    4. Due to the different display and different light, the picture may not reflect the actual color of the item. Thanks for your understanding.

    Package Content:
    5 x Relay Module

    Click Here for additional details on the product.

    Type = Home/Family

    Department = Home Improvement

    Category = Electronic Tools

    Sub Category =

    additional Details = 5Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM

    Part Number = 126091

    Vendor = Newfrog.com

    Vendor ID = 46666

    List Price = $3.25

    Sale Price =

    Buy Now

    DIY Electronics 126091 5Pcs 24V 1-Channel Relay Module Optocouple Board Shield for PIC AVR DSP ARM are available using affiliate programs. Rates and availability are subject to adjustment at any given time. Clicking on the photo or buy now link will take you to that particular sellers website for up to date specifics.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Categories