Look at this site to find DIY parts for all sorts of jobs.

    DIY Electronics 132891 A4988 Pro Driver CNC Shield Expansion Board for V3 Engraver 3D Printer Part

    DIY Electronics 132891 A4988 Pro Driver CNC Shield Expansion Board for V3 Engraver 3D Printer Part}

    Directly below you’ll discover prices and ordering options as well as further information on the DIY Electronics 132891 A4988 Pro Driver CNC Shield Expansion Board for V3 Engraver 3D Printer Part. If you’re attracted to the item and need more help and advice click on the “Picture” or “BUY NOW” buttons for additional specifics.

    DIY Electronics 132891

    List Price = $6.20

    Sale Price =

    Buy Now

    Description = A4988 Pro Driver CNC Shield Expansion Board for V3 Engraver 3D Printer Part.

    Long Description =

    A4988 Pro Driver CNC Shield Expansion Board for V3 Engraver 3D Printer Part

    Features:
    This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
    It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.
    UNO for IO port correspondence introduction.

    Specifications:
    Power: Medium Power
    Model Number: A4988 Driver CNC Shield Expansion Board
    Usage: Light-emitting Diode
    Structure: PNP
    Special Function: Common Point Contact Diode
    Frequency: High Frequency
    Type: Amplifier
    Construction: Schottky Diode
    Material: Silicon
    Install Style: Plug-in
    Function: Power Triode

    IO corresponding figure above

    8 ———————— EN ( stepper motor driver enable , active low )

    7 ———————– Z.DIR (Z -axis direction control )

    6 ———————– Y.DIR (Y -axis direction control )

    5 ———————– X.DIR (X -axis direction control )

    4 ———————- Z.STEP (Z -axis stepper control )

    3 ———————- Y.STEP (Y -axis stepper control )

    2 ———————- X.STEP (X -axis stepper control )

     

    / / The following is a simple stepper motor control procedures,

     

    # define EN 8 / / stepper motor enable , active low

    # define X_DIR 5 / / X -axis stepper motor direction control

    # define Y_DIR 6 / / y -axis stepper motor direction control

    # define Z_DIR 7 / / z axis stepper motor direction control

    # define X_STP 2 / / x -axis stepper control

    # define Y_STP 3 / / y -axis stepper control

    # define Z_STP 4 / / z -axis stepper control

    / *

    / / Function : step . function: to control the direction of the stepper motor , the number of steps .

    / / Parameters : dir direction control , dirPin corresponding stepper motor DIR pin , stepperPin corresponding stepper motor ” step ” pin , Step number of step of no return value.

    * /

    void step (boolean dir, byte dirPin, byte stepperPin, int steps)

    digitallWrite (dirPin, dir);

    delay (50);

    for (int i = 0; i <steps; i + +)

    digitalWrite (stepperPin, HIGH);

    delayMicroseconds (800);

    digitalWrite (stepperPin, LOW);

    delayMicroseconds (800);

    Package Content:
    1 x A4988 Pro Driver CNC Shield Expansion Board


    Click Here for additional details on the product.

    Type = Home/Family

    Department = Home Improvement

    Category = Electronic Tools

    Sub Category =

    additional Details = A4988 Pro Driver CNC Shield Expansion Board for V3 Engraver 3D Printer Part

    Part Number = 132891

    Vendor = Newfrog.com

    Vendor ID = 46666

    Pricing and Availability are subject to change. Click on the BUY NOW link or picture for up to date product details and other useful information directly from the vendor selling the DIY Electronics 132891 A4988 Pro Driver CNC Shield Expansion Board for V3 Engraver 3D Printer Part. ) 

    Didn’t find exactly what your looking for. Click on this link to find out everything this vendor has to offer. =
    DIY Geek, Computer Geek, Media Geek..

    DIY Electronics 132891 A4988 Pro Driver CNC Shield Expansion Board for V3 Engraver 3D Printer Part

    Long Description =

    A4988 Pro Driver CNC Shield Expansion Board for V3 Engraver 3D Printer Part

    Features:
    This expansion board as a driver expansion board, can be used for engraving machines, 3D printers.
    It is a total of four slots, can drive four A4988 stepper motor. Each road stepper motors only need two IO ports. In other words, six IO ports can be well managed three stepper motors. Very convenient to use.
    UNO for IO port correspondence introduction.

    Specifications:
    Power: Medium Power
    Model Number: A4988 Driver CNC Shield Expansion Board
    Usage: Light-emitting Diode
    Structure: PNP
    Special Function: Common Point Contact Diode
    Frequency: High Frequency
    Type: Amplifier
    Construction: Schottky Diode
    Material: Silicon
    Install Style: Plug-in
    Function: Power Triode

    IO corresponding figure above

    8 ———————— EN ( stepper motor driver enable , active low )

    7 ———————– Z.DIR (Z -axis direction control )

    6 ———————– Y.DIR (Y -axis direction control )

    5 ———————– X.DIR (X -axis direction control )

    4 ———————- Z.STEP (Z -axis stepper control )

    3 ———————- Y.STEP (Y -axis stepper control )

    2 ———————- X.STEP (X -axis stepper control )

     

    / / The following is a simple stepper motor control procedures,

     

    # define EN 8 / / stepper motor enable , active low

    # define X_DIR 5 / / X -axis stepper motor direction control

    # define Y_DIR 6 / / y -axis stepper motor direction control

    # define Z_DIR 7 / / z axis stepper motor direction control

    # define X_STP 2 / / x -axis stepper control

    # define Y_STP 3 / / y -axis stepper control

    # define Z_STP 4 / / z -axis stepper control

    / *

    / / Function : step . function: to control the direction of the stepper motor , the number of steps .

    / / Parameters : dir direction control , dirPin corresponding stepper motor DIR pin , stepperPin corresponding stepper motor ” step ” pin , Step number of step of no return value.

    * /

    void step (boolean dir, byte dirPin, byte stepperPin, int steps)

    digitallWrite (dirPin, dir);

    delay (50);

    for (int i = 0; i <steps; i + +)

    digitalWrite (stepperPin, HIGH);

    delayMicroseconds (800);

    digitalWrite (stepperPin, LOW);

    delayMicroseconds (800);

    Package Content:
    1 x A4988 Pro Driver CNC Shield Expansion Board


    Click Here for additional details on the product.

    Type = Home/Family

    Department = Home Improvement

    Category = Electronic Tools

    Sub Category =

    additional Details = A4988 Pro Driver CNC Shield Expansion Board for V3 Engraver 3D Printer Part

    Part Number = 132891

    Vendor = Newfrog.com

    Vendor ID = 46666

    List Price = $6.20

    Sale Price =

    Buy Now

    DIY Electronics 132891 A4988 Pro Driver CNC Shield Expansion Board for V3 Engraver 3D Printer Part are bought thanks to affiliate methods. Pricing and availability are prone to change at any given time. Hitting the image or buy now link will take you to that particular stores website for up to date information.

    Leave a Reply

    Your email address will not be published. Required fields are marked *

    Categories